Furuno 1944C-BB Radar Detector User Manual


 
7. CUSTOMIZING YOUR UNIT
7-8
7.2.3 Function key setup
The function keys provide one-touch execution of a desired function. The default radar
function key settings are as shown in the table below.
Function Key Default Function Function Key Label
1 Turn heading line off. HL
2 Turn range rings on/off. RNG
3 Turn echo trail on/off. TRL
4 Turn display offcenter on/off. OFC
5 STBY/TX TX
If the above settings are not to your liking you may change them as follows:
1. Press the MENU key.
2. Press the D: FUNCTION KEY SETUP soft key.
FUNC
KEY
Function key
setting
Function
key label
H
L
R
N
G
T
R
L
O
F
C
T
X
SOFT KEY 1
HL: HDG LINE OFF
SOFTKEY 2
RNG: RINGS ON/OFF
SOFT KEY 3
TRL: ECHO TRIAL
SOFT KEY 4
OFC: OFFCENTER
SOFT KEY 5
TX: STBY/TX
RETURNE
EDITA
Radar function key menu
3. Select the function key you want to program, then press the A: EDIT soft key.
SOFT KEY 1
OFF
HL: HDG LINE OFF
MOD: MODE
GAI: GAIN
SEA: A/C SEA
RAI: A/C RAIN
FTC: FTC
ES: ECHO STRETCH
PLS: PULSE LENGTH
ZOM: ZOOM
SOFT KEY 1
OFC: OFFCENTER
TRL: ECHO TRAIL
RNG: RINGS ON/OFF
TLL: TLL OUTPUT
ALM: GUARD ALARM
EBL: EBL
VRM: VRM
TTM: TTM ON/OFF
WMK: WPT ON/OFF
WTM: WATCHMAN
SOFT KEY 1
ACQ: ACQUISITION
TX: STBY/TX
RSR: SOURCE RADAR
DBX: D. BOX ON/OFF
CHG: CHANGE CNTRL
QP: QUICK POINT
MRK: MARK ENTRY
Scroll
down
Scroll
down
T
T
S
S
Radar function key options
4. Select function desired with the Trackball, then press the C: ENTER soft key or ENTER
knob to register your selection.
5. Press the MENU key to close the menu.