Filter
Top Products
42
Mounting in the expansion area
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: O:\FTS\PRIMERGY-HW\Rack\PCR-M1-Rack\Manuals\User Manual\02_work\pcr-m1-rack-um-en\pcrm1-rack-um-en.k05
5.4 Mounting in the expansion area
19-inch rack components can be mounted vertically in the optional expansion
area to the left of the 19-inch area.
I The expansion area is only available in 700 mm racks.
The following applies to symmetrical 700 mm racks:
Only 19-inch rack components with a height of 1HU can be mounted.
The following applies to asymmetrical 700 mm racks:
Only 19-inch rack components with a height of 2HU can be mounted.
The cable management (only possible in 700 mm asymmetrical racks) restricts
the depth of the components to 290 mm. Gaps that occur when you mount 1 HU
components must be covered.