Filter
Top Products
26
Overview
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: O:\FTS\PRIMERGY-HW\Rack\PCR-M1-Rack\Manuals\User Manual\02_work\pcr-m1-rack-um-en\pcrm1-rack-um-en.k03
Security
The rack is suitable for installation and operation of rack management systems.
If rack devices with telescopic rails are used, it is necessary for security reasons
to ensure that racks are protected against tilting by means of suitable anti-tilt
protection. Optional available for Fujitsu Racks is an anti-tilt protection that can
be pulled out in case of service.
Standards
Each rack has power connections complying with European and international
standards. There are at least two multiple socket outlet distributions and two
power connections for configuration.
Due to the high leakage current of a fully fitted rack, CEE (IEC60309)
connectors are used. Connection kits for single-phase and three-phase supply
are available, as is a three-phase non-detachable connection. Reliable
grounding in the rack is ensured by the use of IEC60309 connectors.
The power supply components are ideal for these applications and the design
of the power supply ensures reliable and permanent grounding. IEC 60320
connectors are used inside the rack. If grounding in a power supply cable is
interrupted, the leakage current remains limited to < 3,5mA.
Summary of all rack types
V CAUTION!
The maximum transport weight may not exceed 1000 kg.
Base
unit
Type Dimensions
(W/D/H)
Max. pay load /
max. dynamic load
Net
weight
16 HU symmetrical 600x1050x847 mm 320 kg / 380 kg 60 kg
24 HU symmetrical 600x1050x1203 mm 480 kg / 565 kg 85 kg
42 HU symmetrical 600x1050x2003 mm 840 kg / 960 kg 120 kg
24 HU symmetrical 700x1050x1203 mm 480 kg / 590 kg 85 kg
42 HU symmetrical 700x1050x2003 mm 840 kg / 975 kg 120 kg
24 HU asymmetrical 700x1050x1203 mm 480 kg / 590 kg 85 kg
42 HU asymmetrical 700x1050x2003 mm 840 kg / 995 kg 120 kg