Filter
Top Products
34
Inserting mounting elements
© cognitas. Gesellschft für Technik-Dokumentation mbH 2011 Pfad: O:\FTS\PRIMERGY-HW\Rack\PCR-M1-Rack\Manuals\User Manual\02_work\pcr-m1-rack-um-en\pcrm1-rack-um-en.k04
4.6.2 Inserting Spring Nuts
Introduction
You need spring nuts for mounting socket strips for the power supply of the rack
components.
Performing the task
Ê Mark the position of the components to be fitted on the four support uprights.
I In order to facilitate the positioning, assembly aids are shipped with
the rack components.
Figure 8: Inserting spring nuts
Ê Insert the spring nut into the appropriate groove on the support upright at the
marked location (1) - (4).
Ê If necessary, slide the spring nut within the groove until it locks in the correct
position (5).
1
2
3
4
5
5
ca. 45°