Filter
Top Products
19
Important Information
V CAUTION!
The AC main power connection for the PRIMECENTER M1 19-inch rack
must be installed by an authorized electrician approved by the local utility
company.
2.2 Notes on mounting the rack components
Before you start mounting components in the rack, please identify the positions
of the individual components in the PRIMECENTER M1 19-inch rack according
to the configuration generated using the "SystemArchitect" (see page 35). You
should then mark the positions using the relevant assembly aid, if one was
supplied with the rack component.
Marking and numbering the height units simplifies the assembly when installing
and adding on components.
The maximum mounting height for the PRIMECENTER M1 19-inch rack is
16/24/42 height units (HU). One height unit corresponds to 44.45 mm (see
page 44).
Observe the following rules when mounting the components:
● Mount the components in the rack from bottom to top.
● Mount heavy parts at the bottom, e.g. the uninterruptible power supply.
● Mount the keyboard or rack console at a height that makes it easy to operate
(HU 17 - 21).
● Position the dummy covers so that later planned extensions can be installed
without having to rearrange components.
● To accommodate the ventilation concept and ensure proper ventilation of all
the components in the rack, any unused areas must be closed using dummy
covers.
● Mount the unit in accordance with the technical manual and assembly aid
supplied.