Filter
Top Products
22
Assembly
Decorative
Engine
Front Tab
Slots
34
Decorative
Engine
Rear
Tab
Rear
Tab
Slot
Slot
35
• With the decorative engine positioned as shown, fit the
decorative engine over the batteries.
• Fit the tabs on the front of the decorative engine into the
slots behind the seat.
• Press down to fit the tabs on the rear of the decorative
engine into the slots in the back of the vehicle body.
Please Note: To disassemble the decorative engine and
access the batteries, push in on the back of the decorative
engine above the rear tabs.
One-time assembly is now complete. Three extra cap
nuts and three extra #8 x
3
/
4
" screws are included with
your vehicle. You should not have any extra washers or
bushings. If you have extra washers or bushings, carefully
re-read the assembly instructions and correct assembly of
your vehicle as necessary.
Press
Here