Filter
Top Products
18
Assembly
• Insert the straight end of the steering column up through
the square opening in the vehicle body.
• Fit the curved end of the steering column into the hole in
the steering linkage assembly. The steering column fits
snugly into the slot in the brushguard tab.
Steering
Column
Hole
Square
Opening
Brushguard
Tab
27
Steering
Linkage
Assembly
• Holding the brush guard and bolts in place, carefully
position the vehicle body on its side.
• Hand-tighten a lock nut on the end of each bolt.
• Insert two #8 x
3
/
4
" screws through the holes in the
forked brushguard tab and into the vehicle body.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
• Using pliers to grip the lock nuts, tighten the bolts
with lock nuts using a Phillips screwdriver. Do not
over-tighten.
Lock Nut
#8 x
3
/
4
"
screws
Lock Nut
26
Bottom View
Bottom View