Filter
Top Products
Important Notes:
• The front axles have been placed in the motors for
shipment. Be sure to remove the front axles from the
motors before proceeding with assembly.
• Note the position of the motors You will be temp-
orarily removing the motors from the vehicle body to
attach the roll cage assembly. Once the roll cage is
assembled to the vehicle body, you will need to place
the motors back inside the vehicle body.
• You may want the help of another adult to complete
this assembly step.
• Carefully lift the motors up and out of the vehicle body.
Do not try to pull the motors through the holes in the
sides of the vehicle body.
• Position the roll cage over the vehicle body.
• Starting at the back of the vehicle and working towards
the front, fit the shock legs , side legs and front
legs into the vehicle body.
Important Note: Make sure the tabs on the side bars are
positioned in the slots in the vehicle body before fitting the
side legs into the vehicle body.
3
2
14
Roll Cage Assembly
Vehicle Body
Tab
Motors
Gearbox
13
Assembly
2
2
1
1
3
3
• Insert four #8 x
3
/
4
" screws through the vehicle body and
into the roll cage.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
14
• Insert four #8 x 1
1
/
2
" screws through the vehicle body
and into the roll cage.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
• Fit the motors back into the vehicle body.The gear
boxes on the motors should fit into the openings in
the sides of the vehicle body.
15
1
Motor