Filter
Top Products
21
• Plug the motor harness connector into the battery.
Motor
Harness
Connector
32
Assembly
Top View
Please Note: The seat can be assembled in any one of
three positions for your child’s comfort.
• Determine in which position to assemble the seat.
• Fit the tabs on the bottom of the seat into the selected
openings in the vehicle body floor.
• Seat your child in the vehicle to check foot to pedal dis-
tance to make sure the seat is positioned correctly for
your child.
• Once the seat is correctly positioned, insert two
#8 x
3
/
4
“ screws through the holes in the seat and into
the vehicle body.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
Seat
Grooves
33