Filter
Top Products
13
Assembly
Left Roll
Cage
Right Roll
Cage
Roll Cage Crossbar
Please Note: It is easiest to assemble the roll cage by
positioning the parts upside down as shown.
• Fit the straight ends of the left and right roll cages into
the connector posts on the light rack.
• Fit the roll cage crossbar into the connector posts on the
left and right roll cages.
Light Rack
Assembly
Crossbar
11
• Insert four #8 x
3
/
4
" screws into the roll cage. You may
need to spin the crossbar to align the screw holes in the
crossbar with the screw holes in the roll cage connector
posts.
• Tighten the screws with a Phillips screwdriver. Do not
over-tighten.
12