Filter
Top Products
Assembly
30
Bottom View
•Fit the wheel (with a round bushing and hex bushing
inserted) onto the end of the front axle. Make sure the
outside of the wheel (smooth side) faces out.
•Fit a hubcap to the outside of the wheel. Make sure the
peg on the hubcap fits into the small hole in the outside
of the wheel.
29
Outside of Wheel
Hubcap
Front
Axle
Peg
Small Hole
Front
Axle
Assembly Tool
with Lock
Washer Inside
•Turn the vehicle body on its side.
•Fit the lock washer (rounded side up) into the assembly tool.
Make sure it completely fits inside the assembly tool.
•Fit the assembly tool (with lock washer in it) onto the end of
the front axle.
•Tap the assembly tool with a hammer to secure the lock
washer on the end of the front axle.
•Pull the wheel up to be sure it is secure on the front axle.
18
•Fit a round bushing, barrel side first, into the hole in the
inside of a wheel (ribbed side).
•Fit a hex bushing, barrel side first, into the hole in the
outside of a wheel (smooth side).
•Repeat this procedure to insert a round bushing and hex
bushing into the remaining wheel.
Round Bushing
Barrel Side
Hex Bushing
Barrel Side
Round Bushing
Inside
of Wheel
Outside
of Wheel
Hex Bushing
28
Inside of Wheel
•Identify the inside and the outside of a wheel.
•The inside of the wheel has ribs on its surface. The outside
of the wheel has a smooth surface.
Outside of Wheel
Ribs
Smooth Surface
27
Assembly Tool
Lock Washer
Rounded Side UP