Filter
Top Products
Assembly
•Insert two #8 x
3
/
4
" screws through the windshield hinge and
into the windshield.
•Tighten the screws with a Phillips screwdriver.
Do not over-tighten.
18
T
M
•Note the location of six tabs and one peg on the windshield.
•First insert the tab on the side of the windshield (that is
opposite the door) into the slot in the vehicle body.
•Then fit the remaining five tabs and peg on the windshield
into the slots and hole in the vehicle body.
•When you are sure all six tabs and one peg are inserted,
push down on the windshield to snap the tabs in place.
19
15
Windshield
Windshield
Hinge
Peg
Windshield
Tabs
Tabs
IMPORTANT!
Insert side tab into
this slot FIRST
T
M
•Fit the door peg into the hole in the top of the vehicle body.
16
17
•Turn the windshield face down on a
flat surface.
•Fit the windshield hinge to the
corner of the windshield.
Door
Peg
Hole
Windshield
Windshield Hinge
See
Inset