Filter
Top Products
8-13
Specifications
Code Options
PlantWeb Software Functions
A01 Basic Control: One Proportional/Integral/Derivative (PID) Function Block •
Hazardous Location Certifications
E5 Factory Mutual (FM) Explosion Proof Approval •
I5 Factory Mutual (FM) Intrinsic Safety Approval •
K5 Factory Mutual (FM) E5 and I5 Combination Approval •
I1 BASEEFA/CENELEC Intrinsic Safety Certification •
N1 BASEEFA Type N Certification •
ED KEMA/CENELEC Flameproof Certification •
E6 Canadian Standards Association (CSA) Explosion Proof Approval •
I6 Canadian Standards Association (CSA) Intrinsic Safety Approval •
C6 Canadian Standards Association (CSA) E6 and I6 Combination Approval •
E7 Standards Association of Australia (SAA) Flameproof Certification •
Other Options
M5 LCD Indicator •
P2 Cleaning for Special Services •
R10 Remote Electronics with 10 ft (3.0 m) Cable •
R20 Remote Electronics with 20 ft (6.1 m) Cable •
R30 Remote Electronics with 30 ft (9.1 m) Cable •
RXX Remote Electronics with Customer-specified Cable Length (Up to 75 feet (23 m) Maximum)
(4)
•
V5 External Ground Screw Assembly
(5)
•
Certification Options
Q4 Calibration Data Sheet per ISO 10474 3.1.B •
Q8 Material Traceability Certification per ISO 10474 3.1.B •
Q14 German TRB 801 Nr.45 Certification per ISO 10474 3.1.B •
Q69 Inspection Certificate Weld Examination (Wafer) per ISO 10474 3.1.B
(6)
•
Q70 Inspection Certificate Weld Examination (Flanged) per ISO 10474 3.1.B •
Q71 Inspection Certificate Weld Examination (Flanged) per ISO 10474 3.1.B (Includes X-Rays) •
Typical Model Number: 8800C F 020 S A1 N 1 F 1 A01 M5
(1) ½-4 in. (15-100 mm) flanged-style meters are with A1, A3, A6, C1, C3, D1, D3, D6, H1, H3, J1, J2, and J4 flange codes only.
6-in. (150 mm) and 8-in. (200 mm) are only available in A1, A3, A6, D1, D3, D6, J1, J2, and J4 flange codes.
½-4 in. (15-100 mm) with flange codes A1, A3, A6, C1, and C3; 2 in. (50 mm) through 4 in. (100 mm) with flange codes D1, D3, H1, and H3
codes use lap joint flanges; all others use weld-neck flanges.
Wafers are available with A1, A3, A6, D1, D3, D4, D6, J1, J2, and J4 flange codes only.
(2) D6 and H6 are not available for stainless steel 3-in. (80 mm) wafer meter style.
(3) Includes one analog input (AI) function block and Backup Link Active Scheduler.
(4) XX is customer-specified length in feet.
(5) The V5 option is only available with no approval or E5, I5, K5, E6, I6, or C6. Option V5 is standard with the other approvals and does not
need to be ordered separately.
(6) Q69 only available for stainless steel ½-in. (15 mm), 6-in. (150 mm), and 8-in. (200 mm) line sizes.