Filter
Top Products
Rosemount Model 8800C Vortex Flowmeter with FOUNDATION
TM
Fieldbus
8-12
ORDERING INFORMATION
Model Product Description
8800C Vortex Flowmeter, Stainless Steel Wafer, Flanged, and Dual-sensor and
Hastelloy
Flanged and Dual-sensor •
8800A Vortex Flowmeter,
Hastelloy
Wafer Meters Only •
Code Meter Style
W Wafer Style •
F Flanged Style •
D Dual-sensor Style (Flanged Style Only) •
Code Line Size
005 ½ in. (15 mm) •
010 1 in. (25 mm) •
015 1½ in. (40 mm) •
020 2 in. (50 mm) •
030 3 in. (80 mm) •
040 4 in. (100 mm) •
060 6 in. (150 mm) •
080 8 in. (200 mm) •
Code Wetted Materials
S 316L Wrought Stainless and CF-3M Cast Stainless •
H
(1)
C-22
and C-276 Wrought
Hastelloy
; CX2MW and CW12MW Cast
Hastelloy
½–8 in. (15–200 mm) Wafer and Flanged; ½–4 in. (15–100 mm) Dual-sensor Style
•
Code Flange or Alignment Ring Size
A1 ASME B16.5 (ANSI) RF Class 150 •
A3 ASME B16.5 (ANSI) RF Class 300 •
A6 ASME B16.5 (ANSI) RF Class 600 •
B1 ASME B16.5 (ANSI) RTJ Class 150 for Flanged Style Only •
B3 ASME B16.5 (ANSI) RTJ Class 300 for Flanged Style Only •
B6 ASME B16.5 (ANSI) RTJ Class 600 for Flanged Style Only •
C1 ASME B16.5 (ANSI) RF Class 150, Smooth Finish •
C3 ASME B16.5 (ANSI) RF Class 300, Smooth Finish •
C6 ASME B16.5 (ANSI) RF Class 600, Smooth Finish •
D0 DIN PN 10 2526-Type D •
D1 DIN PN 16 (PN 10/16 for Wafer Style) 2526-Type D •
D2 DIN PN 25 2526-Type D •
D3 DIN PN 40 (PN 25/40 for Wafer Style) 2526-Type D •
D4 DIN PN 64 2526-Type D •
D6 DIN PN 100 2526-Type D
(2)
•
G0 DIN PN 10 2512-Type N for Flanged Style Only •
G1 DIN PN 16 2512-Type N for Flanged Style Only •
G2 DIN PN 25 2512-Type N for Flanged Style Only •
G3 DIN PN 40 2512-Type N for Flanged Style Only •
G4 DIN PN 64 2512-Type N for Flanged Style Only •
G6 DIN PN 100 2512-Type N for Flanged Style Only •
H0 DIN PN 10 2526-Type E •
H1 DIN PN 16 (PN 10/16 for Wafer Style) 2526-Type E •
H2 DIN PN 25 2526-Type E •
H3 DIN PN 40 (PN 25/40 for Wafer Style) 2526-Type E •
H4 DIN PN 64 2526-Type E •
H6 DIN PN 100 2526-Type E
(2)
•
J1 JIS 10K •
J2 JIS 20K •
J4 JIS 40K •
Code Sensor Process Temperature Range
N Standard: –40 to 450 ЊF (–40 to 232 ЊC) •
E Extended: –330 to 800 ЊF (–200 to 427 ЊC) •
Code Conduit Entry
1 ½–14 NPT •
2M20ϫ 1.5 •
3PG13.5 •
Code Outputs
F
F
OUNDATION
Fieldbus
Digital Signal
(3)
•
Code Calibration
1 Flow Calibration •
Continued on Next Page