Filter
Top Products
GETTING STARTED LBI-3907
7
11
When the desired operation is selected (highlighted), press the Enter key and follow the on-screen instructions, including any
directions in the HELP window and any message in the alert and status message field. Press the Esc key one or more times to
return to the Main Menu screen.
COMM GROUP
The Comm group of operations is the third group shown in the Main Menu. Figure 3 shows a sample Main Menu screen with
the
Comm
group selected. When this group is first selected, the
Update
operation is automatically selected. Selecting another
operation will change the information in the HELP window.
Figure 3 - Sample Main Menu Screen with the
Comm
Group Selected
The
Comm
group of operations requires communication with a GTI unit in the system via a local or remote data link, to send
and/or receive information about the system’s configuration or performance. If two or more GTI Configurators are permitted
to access a specific system, only one can have access at a time. This group includes the following specific operations:
• The
Update
operation is used to send the latest changes in the GTI database to the GTI units in the selected system.
• The
get/Verify
operation is used to get the current GTI database from the GTI units in the selected system, and
verify it against the current GTI database for that system in the GTI Configurator.
• The
Retrieve Billing
operation is used to retrieve call detail billing data from the selected system.
• The
Monitor
operation is used to set up the Real-Time Monitoring mode for the selected system.
• The
Status info.
operation is used to retrieve, display, and store status information for each repeater associated with
a GTI unit in the selected system. The status information is stored in a file named STATXXX.INF, where XXX is
the system number.
• The
Balance and levels
operation is used to balance the audio hybrid for a two-wire telephone line and set the audio
levels.
• The
Other
operation is used for miscellaneous functions such as changing passwords, setting the date/time, clearing
the call detail buffer, and changing the modem initialization string.