Filter
Top Products
L
BI-39077 GETTING STARTED
10
• The Telco config operation is used for parameters that are specific to an individual telephone line connected to a
GTI unit.
• The DID numbers operation is used for parameters that are specific to DID use on a specific system of GTI units at
a specific location.
When the desired operation is selected (highlighted), press the Enter key and follow the on-screen instructions, including any
directions in the HELP window and any message in the alert and status message field. Press the Esc key one or more times to
return to the Main Menu screen. After editing the system configuration database, select the Update operation from the Comm
group in the Main Menu screen, press the Enter key, and follow the on-screen directions to send the new configuration to the
GTI units.
VIEW GROUP
The View group of operations is the second group shown in the Main Menu. Figure 2 shows a sample Main Menu screen with
the View group selected. When this group is first selected, the System config operation is automatically selected. Selecting
another operation will change the information in the HELP window.
Figure 2 - Sample Main Menu Screen with the View Group Selected
The View group of operations allows you to look at (but not make additions, deletions, and modifications to) various parts of
the GTI Configurator database (not the GTI database). This group includes the following specific operations:
• The System config operation is for parameters that are common to a specific system of GTI units at a specific
location.
• The Telco config operation is for parameters that are specific to an individual telephone line connected to a GTI
unit.
• The DID numbers operation is for parameters that are specific to DID use on a specific system of GTI units at a
specific location.