Filter
Top Products
2001 Edelbrock Corporation
Brochure No. 63-0020
©
Rev. 10/01
Page 5 of 27
1.0 Introduction to your Edelbrock LT1 Performer EFI Nitrous System
….about this manual!
Within the pages of this manual is information, safety tips and operation instructions for your new Edelbrock Nitrous
System. Watch for these symbols to know where to go for information.
….There is safety related information here.
….shows where technical information about your vehicle or specific skills that may help during
installation.
….call Edelbrock Technical support hotline for more information.
1.1 General Information
The Edelbrock Performer EFI Nitrous system (Part Number 70207) is designed for 1993 to 1997 LT1
Camaro/Firebird/Impala vehicles equipped with stock or slightly modified LT1 engines. Horsepower
and torque increases can vary with equipment upgrades and modifications.
This system utilizes one nozzle that is installed in the intake boot after the MAF (mass air sensor) and
before the throttle body. The additional fuel needed is supplied by the vehicle’s standard fuel system.
This system has been designed with some flexibility as to where certain components can be located to
allow easy installation on vehicles with upgraded or modified equipment. The solenoid and microswitch
brackets are designed to be manipulated (bent, cut, twisted, etc.) and the electrical components have
properly-sized and ample lengths of wire.
This system includes the bottle (shipped empty), bottle feed line and universal footprint steel bottle
brackets. The mounting brackets also include rubber insulators to protect the surface of your nitrous bottle
while mounted in the brackets. When installing your nitrous bottle, pay close attention to the installation
instructions for the location of your bottle. Make sure that the installation of your bottle does not interfere
with any systems that may lie under the location where you plan to drill holes for mounting the brackets.
Call your local automotive store, motorcycle shop or race track for refilling of your bottle. Trust a
professional to properly fill your bottle and reference your installation manual when re-installing your filled
bottle back into your vehicle.
Always take care when handling a full bottle of nitrous oxide. Please reference this manual for further
safety measures to take during the handling of a nitrous oxide bottle.
Please follow all safety methods during the installation of your Edelbrock Nitrous System, and follow all
vehicle regulations and road laws when using your nitrous system.
℡℡