Filter
Top Products
6
© 2008 Directed Electronics. All rights reserved.
After the remote start module has been installed, test the remote start mod-
ule in accordance with the Safety Check outlined in this installation guide. If
the vehicle starts when performing the Neutral Safety Shutdown Circuit test,
the remote start unit has not been properly installed. The remote start mod-
ule must be removed or properly reinstalled so that the vehicle does not start
in gear. All installations must be performed by an authorized Ungo dealer.
OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS
IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION. OP-
ERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS
MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY. IMMEDI-
ATELY CEASE THE USE OF THE UNIT AND REPAIR OR DISCONNECT
THE INSTALLED REMOTE START MODULE. CLARION WILL NOT BE HELD
RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS.