Filter
Top Products
44
© 2008 Directed Electronics. All rights reserved.
1-7 Factory Alarm Disarm-With Unlock, Before Unlock, Remote Start Only: In
the default setting the factory alarm disarm output will disarm the factory alarm
system any time the button controlling Unlock or Remote Start is pressed. The
“Before Unlock” output will disarm the factory alarm before the unlock output ac-
tivates and when remote start is activated. The “Remote Start Only” will disarm
the factory alarm only when the remote start is activated.
1-8 Factory Alarm Disarm 1 pulse: FAD 2 pulses. This setting determines how
many pulses the system will output on the Factory alarm disarm wire.
1-9 Comfort Closure 1
The system can be programmed to close the windows when the system is locked.
If programmed ON, the lock output provides a 20 second pulse when the sys-
tem is locked. The output will be cancelled if the unlock button is pressed. In the
Off setting the system will not do this function. (3) Comfort Closure 2 - Activates
the 20 second timer with the door lock pulse. (2) Comfort Closure 1 - Activates
the 20 second timer after the door lock pulse.
To test if the car has the comfort closure:
Insert the key into the driver’s door key cylinder.1. 1.
Turn the key to the lock position and hold for about 10 seconds. If Com-2.
fort closure is available, the windows (and in some cars the sunroof] will
close.
Note: Some cars require that you turn the key once, release it and then turn and
hold into lock position.
Important: Comfort closure can only be used on cars that have the capability of
closing the windows (and in some cars the sunroof as well) with the key cylinder
in the door.
1-10 Panic Mode ON/OFF: When On the panic feature can be activated at
any time from the remote and will sound for 30 seconds. When off, the panic
feature does not function.