Filter
Top Products
37
© 2008 Directed Electronics. All rights reserved.
Channel Function
1
Auto Learn Standard Configuration (default)
The auto learn configuration will automatically setup the remote
button configuration. .
2
Delete remotes: This feature will erase all remotes from the memory
of the system. This is useful in cases when a customer’s remote is
lost or stolen.
3
Reset Features: This resets all the features of the system to the fac-
tory default settings.
4
Intelli-Tach Reset: Deletes all previously learned values for Intell-
Tach, and on the next remote start sequence the unit will begin
Intelli-Tach initialization.
3.Transmit. While holding the Program switch, press the
button on the remote control. The horn honks to confirm that
the code has been successfully programmed. It is not possi-
ble to teach a remote button to the system more than once.
4. Release. Once the code is learned, the Program switch
can be released.
You can advance from programming one channel to an-
other by releasing the Program switch and tapping it to
advance channels and then holding it.