Filter
Top Products
41
© 2008 Directed Electronics. All rights reserved.
Choose. Within 10 seconds, press and release the 3.
Program switch the number of times corresponding
to the feature number you want to program and
then press and hold the switch. .
Transmit. The transmitter is used to select the de-4.
sired setting. Pressing button one changes the
feature to the LED On setting (or flashes once for
features with more than 2 settings). The horn
honks once. Pressing button 2 changes the set-
ting to the LED OFF setting (or flashes two or more
times for features with more than 2 settings) .
Release, the Program switch. 5.
You can advance from feature to feature by pressing and re-
leasing the Program switch the number of times necessary to
get from the feature you just programmed to the feature you
wish to access. For example, in Menu One, if you just programmed Feature 1-2
and you next want to program Feature 1-3 to off, release the Program switch.
Press and release it once to advance from Feature 1-2 to Feature 1-3. Then press
it once more and hold it. The LED will flash in groups of 3 to confirm that you
have accessed Feature 1-3.
The learn routine is exited when:
The ignition is turned on.•
The Program switch is pressed too many times.•
More than 25 seconds elapses between programming steps.•