Filter
Top Products
© 2000 Directed Electronics, Inc. Vista, CA 23
5. Release the Valet/program switch.
ONCE THE FEATURE IS PROGRAMMED
■ Other features can be programmed.
■ The Learn Routine can be exited if programming is complete.
TO ACCESS ANOTHER FEATURE
After you have programmed a feature in Step 4 of the learn routine, press and release the Valet/program switch
the number of times necessary to advance from the feature you just programmed to the next one you want to
program. Then press the Valet/program switch once more and HOLD it. For example, if you just programmed the
third feature and you would like to program the seventh feature in the menu, you would: Press and release the
Valet/program switch four times. Then press it once more and HOLD it. The siren would chirp seven times to
confirm access to the seventh feature.
TO EXIT THE LEARN ROUTINE, DO ONE OF THE FOLLOWING:
■ Close the open door.
■ Turn the ignition on.
■ No activity for longer than 15 seconds.
■ Press the Valet/program switch too many times.
feature descriptions
1 ACTIVE/PASSIVE ARMING: When active arming is selected, the system will only arm when the transmitter is
used. When set to passive arming, the system will arm automatically 30 seconds after the last door is closed. To
alert the consumer of passive arming, the siren will chirp and the parking lights will flash 30 seconds after the
door is closed.
2 AUDIBLE ARM/DISARM CONFIRMATION ON/OFF: This feature controls the chirps that confirm the arming and
disarming of the system. In the ON setting (default) the siren will provide audible confirmation when arming
and disarming the system. If programmed to the OFF position no siren chirps will be heard when arming and
disarming.
3 SIREN DURATION 30/60 SECONDS: In the default setting, the full triggered sequence will continue when trig-
gered for 30 seconds. This can be changed to 60 seconds in the system features learn routine.