30
Quick Navigation
You can define the Quick Nav. location by selecting either the To Predefined Address or To Nearest POI
Category in the Quick Nav. Settings screen. When the location is selected, you can navigate to your address
by tapping the Quick Nav.
button displayed on the Map screen.
For example, if you have selected "Gas Stations" as the Quick Nav. destination, when you click the Quick Nav.
from the Map screen, Destinator automatically creates a route to the closest gas station.
Figure 28 - Setting the Quick Nav Location
GPS Settings
Destinator ND uses the GPS receiver to pinpoint your location. GPS signals are automatically acquired and
your vehicle's location and position are constantly updated unless you are working in the Browse Map mode.
The GPS may take a few minutes to find its initial location. For best results, ensure that the GPS has a clear
view of the sky.
Figure 29 - GPS Status
You can tap the GPS Status button from the Settings menu to display the following information:
Longitude - The angular distance east or west on the earth's surface, as measured in degrees from the
meridian of a particular point to the prime meridian of Greenwich, England.
Latitude - The angular distance, measured north or south from the equator, of a point on the earth's surface.
Speed - The rate of movement, as expressed by kilometers or miles per hour.
Altitude - The height above sea level.
The green lines that appear on the satellite image represent the satellites that are sending GPS signals to your
receiver.