Crimestopper Security Products CS-2004TW2 Automobile Alarm User Manual


 
VALET PARK VALET DATA TRANSLATE IGN TRIGGER (FLASH) SHOCK SENSOR (FLASH)
WARN AWAY (FLASH)
OPERATION
ACTIVE ARMING
To arm the alarm and lock the doors, press the #1 Button on any remote. You will hear a single siren chirp and the
lights will flash once. The system will arm, the doors will lock (optional) and the starter will be disabled. The red in-
dash LED in the vehicle will begin to flash. After a short delay of 10-15 seconds to allow vehicle and electronics to
stabilize the system will be completely armed.
DISARMING
To disarm the alarm and unlock the doors, press the #2 Button on any remote. You will hear 2 siren chirps and the
lights will flash twice. The in-dash LED stops flashing dome light turns on (Optional). If the alarm is currently
tripped, then the #2 Button will have to be pressed two times. The first press will only reset the trigger and the
second press will Disarm the system. See “ARMED CYCLE RESET”.
2
1