Filter
Top Products
N.I.C.E. P200
25
Turning the power on and off
Turning the N.I.C.E. P200 on
To turn the power on, press and release the power
button briefly. It’s not necessary to hold the power
button for more than a brief second.
Sleep mode
Pressing the power button briefly puts the N.I.C.E.
P200 into standby state called sleep mode:
• The screen displays “Entering Sleep Mode.”
• The N.I.C.E. P200 stores your current mode,
such as navigation mode.
• The LEDs (tiny blue lights in the middle of the
MENU, MUTE and volume buttons) remain on.
When you briefly press and release the power
button again, the N.I.C.E. P200 returns to the mode
you were in.
In sleep mode, the N.I.C.E. P200
continues to draw a small amount of
power. Over time, this draw will drain
the battery.
Power off
Pressing and holding the power button for two
seconds turns the power fully off.
• The LEDs turn off.
• The N.I.C.E. P200 does not store the current
mode.
If you are not going to use the N.I.C.E. P200 for a
period of time, turn it fully off to conserve battery
charge.
When you briefly press and release the power
button again, the N.I.C.E. P200 displays the main
menu.
Note