Filter
Top Products
Chapter 7: Care and updating
117
N.I.C.E. P200 displays an “abort”
message or the system stops
working.
Turn the power off and back on
again, and start over. If powering
off and back on again fails, press
the reset button. See “Resetting
the N.I.C.E. P200” on page 118.
When trying to update firmware,
the N.I.C.E. P200 displays, “OS
Update File can’t be found.”
See “Upgrading the firmware” on
page 108.
Description Probable Cause Remedy