Filter
Top Products
Searching Your Destination from the Destination Menu
27
NAX980HD
English
Going Home
When your home address is registered, you can
start route guidance to your home by a simple
operation.
Note:
When your home address is not registered, register
it by touching the [Home (Add New)] key. When the
list of searching methods appears, register your
home address by the desired method. You can also
register your home from the [Stored Data] of the
Navigation settings. ➜ “Home Location” (P. 45)
1. Touch the [Home] key.
The route to your home is automatically
calculated.
2. Touch the [Start] key.
By Phone Number
You can search for destination by entering the
telephone number of the facility you wish to go to.
Note:
The entered telephone number may not be found.
You can search only facilities where the telephone
number is registered.
1. Touch the [Phone Number] key.
The phone number input screen is displayed.
2. Enter the telephone number of the facility you
wish to go to by touching number keys on the
screen.
You need to enter the complete telephone
number.
3. Touch the [OK] key.
4. Confirm the location of the destination, then
touch the [OK] key.
5. Touch the [Start] key.
By Previous Destination
The destinations previously used are registered
in the previous destination list (up to 100
locations). You can enter a destination by
selecting it from this list. When the previous
destination list exceeds 100 items, the oldest
entries are automatically deleted.
1. Touch the [Previous Destinations] key.
2. From the displayed previous destination list,
touch the place you wish to go.
3. Touch the [OK] key.
4. Touch the [Start] key.
By Previous Starting Point
You can set the last start location as the
destination. In case you want to set a return route
from the reached destination, you can enter the
new destination quickly using this method.
1. Touch the [Previous Starting Point] key.
2. Confirm the location of the destination, then
touch the [OK] key.
3. Touch the [Start] key.
By Stored Route
Selects a route previously registered, then set it
as the new route.
Note:
To use this function, one or more registered routes
are required. When a route is currently set, you can
register this route by touching the [None (Add New)]
key in case the route contains at least one waypoint.
You can also register the current route using the
Route menu. ➜ “Stored Route” (P. 46)
1. Touch the [Stored Routes] key.
2. From the displayed stored route list, touch the
route you wish to set.
3. Touch the [Start] key.
By Freeway Entrance/Exit
You can search an entrance or exit of a freeway
to set as the destination.
1. Touch the [Freeway Entrance/Exit] key.
2. Touch the [Region] key, then touch the region
name, if necessary.
3. Touch the [Freeway] key.
4. Enter the name of the freeway, then touch the
[OK] key.
5. From the displayed Freeway list, touch the
desired freeway to select.
6. Select the [Entrance] or [Exit] key.
7. From the displayed Entrance list or Exit list,
touch the place you wish to go to select it.
[by Dist.]
The list is sorted by nearby order after
pressing this key. This key is displayed when
the list is set to the order along the road.
[on the Way]
The list is sorted by order along the road after
pressing this key. This key is displayed when
the list is set to the nearby order.
8. Confirm the location of the destination, then
touch the [OK] key.
9. Touch the [Start] key.