Filter
Top Products
Setting Preset Stations
Up to 30 stations (six FM1, six FM2, six AM, six XM1 and
six XM2), can be programmed on the six numbered
pushbuttons.
To program preset stations:
1. Tune to a station and select the equalization, DSP,
or PTY (program type) setting if desired.
2. Press and hold one of the six numbered
pushbuttons for two seconds until a beep sounds.
The set preset station number displays above the
set pushbutton. If the numbered pushbutton is
pressed for less then two seconds, the radio tunes
to the station set to that pushbutton.
3. Repeat the steps for each pushbutton.
For more information, see Radio(s) on page 4‑95.
Setting the Clock
To adjust the time:
1. Press
w , located on the radio, to enter the
main menu.
2. Turn
w until SET CLOCK displays.
3. Press
w to select SET CLOCK.
4. Turn
w to adjust the time.
5. Press
w to update the time and VEHICLE TIME
UPDATED displays.
To adjust the date:
1. Press
w to enter the main menu.
2. Turn
w until SET DATE displays.
3. Press
w to select SET DATE.
4. Turn
w to adjust the date.
5. Press
w to update the date and VEHICLE DATE
UPDATED displays.
1-15