Filter
Top Products
TWILIGHT DELAY
This feature allows you to set the amount of time you
want the exterior lamps to remain on after you exit the
vehicle.
Programmable Modes
Mode 1 : 0:00 seconds (off)
Mode 2 : 0:05 seconds (default)
Mode 3 : 0:15 seconds
Mode 4 : 0:30 seconds
Mode 5 : 1:30 minutes
Mode 6 : 2:00 minutes
Mode 7 : 3:00 minutes
Mode 8 : 4:00 minutes
To determine the mode to which the vehicle is
programmed or to program the vehicle to a
different mode:
1. Enter the PERSONAL SETTINGS MENU by
following the instructions listed previously under
“Entering the Personal Settings Menu.”
2. Turn the tune/select knob until TWILIGHT DELAY
is highlighted.
3. Press the tune/select knob to scroll through the
available delay settings and set your selection.
If you choose Mode 1, the exterior lamps will not
illuminate when you exit the vehicle. Only one
mode can be selected at a time.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature
available on your vehicle.
3-68