Filter
Top Products
Decreasing Set Speed While Using
Adaptive Cruise Control
Press T at the end of the lever until the lower speed
desired is reached, then release the button.
To slow down in small amounts, briefly press
T .
Each this is done, the set speed will be 1.6 km/h
(1 mph) slower.
Resuming a Set Speed
If the brakes are applied while the Adaptive Cruise
Control is at a set speed, this disengages the Adaptive
Cruise Control. But it does not need to be reset.
Once the vehicle reaches about 48 km/h (30 mph) or
more, move the Adaptive Cruise Control switch briefly
from
R to S . Adaptive Cruise Control will be engaged
with the speed previously selected.
Selecting the Follow Distance (GAP)
When the system detects a slower moving vehicle, it
will adjust your vehicle's speed and maintain the
following distance (gap) selected.
Use the GAP button on the steering wheel to adjust the
follow distance between your vehicle and other
vehicle's.
Press the top of the button to increase the distance or
the bottom of the button to decrease the distance.
The first button press shows the current follow distance
setting on the HUD. The current following distance
setting is maintained until it is changed.
There are six follow distances to choose from. The
follow distance selection ranges from near to far
(one second to two seconds follow time). The distance
maintained for a selected follow distance varies based
on vehicle speed. The faster the vehicle speed the
further back you will follow. Consider traffic and
weather conditions when selecting the follow distance.
4-20