Filter
Top Products
Warning the Driver
The alert symbol will flash
on the HUD and a
warning beep will sound
when driver action may be
required.
The driver warning is active when:
.
You are approaching a vehicle too quickly.
.
You are following a vehicle ahead much too
closely.
See Defensive Driving
on page 5‑2
for more
information.
Detecting the Vehicle Ahead
The vehicle ahead symbol will only appear on the HUD
when a vehicle ahead of you is detected in your path.
If this symbol does not appear, or disappears briefly,
FCA will not respond to vehicles you may see ahead.
The symbol may disappear on curves, highway exit
ramps, or hills. Also, when another vehicle enters the
same lane as you, the FCA system will not detect the
vehicle until it is completely in your driving lane.
{
WARNING:
When the Adaptive Cruise Control radar is
blocked by snow, ice, or dirt, it may not detect a
vehicle ahead. FCA may not help you avoid a
collision under these conditions. Do not use FCA
when the radar is blocked by snow, ice, or dirt.
Keep your radar clean. See “Cleaning the
System” under Adaptive Cruise Control
on
page 4‑15
.
{
WARNING:
FCA may not detect and warn soon enough to
stationary or slow-moving vehicles or other
objects ahead of you. You could crash into an
object ahead of you. Do not rely on FCA when
approaching stationary or slow-moving vehicles or
other objects.
4-8