Filter
Top Products
AUTO (Automatic) : Turns the exterior lamps on and
off automatically depending upon how much light is
outside of the vehicle.
The automatic lights may be disabled even if the control
is in the AUTO position.
To enable automatic lighting do any of the following:
.
Turn the headlamp control from AUTO to off and
release the switch. It returns back to the AUTO
position by itself.
.
Turn the headlamp control from the parking lamp
position to AUTO.
.
Turn the headlamp control from the headlamp
position to AUTO.
To disable automatic lighting do any of the following:
.
Turn the headlamp control from AUTO to off and
release the switch. It returns back to the AUTO
position by itself.
.
Turn the headlamp control from AUTO to the
parking lamp position.
.
Turn the headlamp control from AUTO to the
headlamp position.
Disabling automatic lighting disables the automatic
headlamp operation, DRL, and IntelliBeam™
High-Beams (if the vehicle has them).
; (Parking Lamps) : Turns on the parking lamps
together with the following:
.
Sidemarker Lamps
.
Taillamps
.
License Plate Lamps
.
Instrument Panel Lights
5 (Headlamps) : Turns on the headlamps, together
with the previously listed lamps and lights.
IntelliBeam™ Intelligent High-Beam
Headlamp Control System
For vehicles with IntelliBeam, read this entire section
before using this feature.
IntelliBeam is an enhancement to the vehicle's
headlamp system. It uses a light sensor located on
the back of the rearview mirror to turn the high-beam
headlamps on and off depending on approaching traffic.
The IntelliBeam system turns the high-beam headlamps
on when it is dark enough, there is no other traffic
present, and the IntelliBeam system is enabled.
Turning On and Enabling IntelliBeam
AUTO 3 (IntelliBeam On/Off): Press and release
the IntelliBeam button on the inside rear view mirror.
The indicator on the mirror turns on. Once the system
4-28