Filter
Top Products
P.2 Installation Guide CT-5000
Table of Contents
Introduction.....................................................2
Included in the Package.................................2
Installation Tools:............................................3
Before You Get Started…...............................3
Harness Description .......................................4
6-Pin Main Ignition Harness .......................4
5-Pin Secondary Harness...........................5
12-Pin Accessories Harness ......................6
2-Pin Harness.............................................9
Flashing the Hood Pin ....................................9
What is Flashing the Hood Pin?................9
The Programming Assistance Button (A.k.a.
PAB.) ............................................................10
How to Program the Transmitter. .................10
How to Enter Options Programming Mode...10
Options Programming...................................11
Horn Honk / Siren Timing (Optional) ........13
Auto Tach Programming Procedure........13
Multi-Speed Tach Programming...................14
Testing..........................................................14
Closing Up....................................................15
Supplementary Information ..........................15
Fifth Relay Output (2
nd
IGN or 2
nd
ACC or
2
nd
START)...............................................15
Ignition-Controlled Door Locks................. 16
Secure Lock.............................................. 16
Turbo Mode.............................................. 16
Safe Start (Child Safety Mode)................. 17
Siren or Horn Chirps.................................17
Vehicle Type – Gas Or Diesel.................. 17
Passive Or Active Arming......................... 17
Disarmed Notification ...............................18
Two-Stage Disarm.................................... 18
Shock Sense Bypass ............................... 18
Resetting The Module .................................. 18
Events Logging............................................. 18
Events playback ....................................... 18
Start Failure Codes via Parking Lights..... 19
Intrusion Codes ........................................ 19
Intrusion Codes via LED light....................... 19
Installation Order.......................................... 19
A basic introduction to the Relay:................. 21
Troubleshooting Poor Transmitting Range .. 25
Trouble shooting Q & A................................ 25
Chirps........................................................... 28
Diagnostics - Parking Lights Flash Rate...... 29
Introduction
This Guide contains all information pertinent to the installation. Most (if not all) features are
grouped in the User Guide and therefore, should you need information on a feature, you
should refer to the User Guide
Included in the Package
Please review the Installation Guide before beginning the installation, particularly the Wiring
Schematic and the Programming Options.
It is very important that you familiarize yourself with the programming and the operation of the
system, even if you have already installed a similar system in the past. There are many great
features that may be overlooked if the manual is not read; this would prevent you from
maximizing the potential of the Module.
Prior to the installation, make sure that all the hardware components required to install the
system are in the box.
The following is a list of components included in the kit:
1 – Control Unit
1 – Super-regeneration monopole
receiver or Long-range super-
heterodyne receiver
1 – Plug-in dual-zone Shock Sensor
1 – Plug-in Push-button Valet Switch
1 – High-power 120-dB 6-tone Siren