Filter
Top Products
P. 6 User Guide
15 Alarm Clock Menu ALARM
Alarm hours
A 12:00
12 is flashing
Adjusts alarm hour
(value from 0 to 12).
Alarm minutes
A 12:00
00 is flashing
Adjusts alarm minute
(value from 0 to 59).
Toggle alarm
A – ON +
Or
A – OFF
Enables or disables alarm.
Parking Countdown
This version of the countdown feature is particularly useful for keeping track of parking meter time:
The user may quickly set up the countdown using the
Parking Menu. The transmitter will beep once,
5 min. before the Parking countdown reaches 0.
Alarm Clock
The LCD remote control has a built-in alarm clock, which can be set up using the
Alarm Clock
Menu
. Once the programmed time is reached, the remote will beep 6 times every minute until a
button is pressed.
CWM Menu:
When this feature is enabled, press
for 3 sec. to enter or exit Cold Weather Mode. If disabled,
press
(enter L-01) → button to enter or exit Cold Weather Mode.
Valet Menu:
When this feature is enabled, press
for 3 sec. to enter Valet Mode. When this feature is
disabled, press + buttons simultaneously.
Time Start Menu:
This feature is used to remote start the car at a pre-programmed time. Once the pre-programmed
time is reached, the remote will send a start command to the car module.
Note: The car will only start once.
Secure Remote Feature:
This feature is used to lock the keypad of the transmitter to avoid an accidental button press. When
the remote is locked and a button (except
) is pressed, the LCD will display “PRESF” for 1
second and go back to the clock.
The transmitter keypad can also be locked as follows:
• Press to go to Menu
• Within 3 seconds, press
Press for about 1 second to unlock the transmitter’s keypad. At the same time, the LCD screen
will display “
PRESb” for 1 second and then go back to the clock.
Clock Menu:
The Clock menu is used to set the current time on your remote control.
F Button Function Menu:
The order of
LEVELS and MENU can be re-arranged using the F Button Function Menu.