Filter
Top Products
User Guide P. 17
How to Access Run Time Status (Indications purposes only)
Function By pressing Icon Gasoline Diesel
3 minutes 8 minutes
Engine runtime
15 minutes 20 minutes
25 minutes 30 minutes
Temperature Request (If ACC-Temp-101 installed)
The user can request the temperature in the vehicle if a Temperature Sensor Module (ACC-Temp-
101) is installed:
• Press the button for 1 second and release; you will hear a beep. L-01 will appear on the
screen.
• Immediately press the button and hold it until the temperature is displayed on the LCD
screen.
Note: to change the temperature from Celsius to Fahrenheit, the user needs to refer to the
MENU.
Horn Chirp Timing
The pulse duration can be configured by your installer (from 5 ms. to 200 ms.).
Pager Function
This function will help you find the remote. By pressing the Valet button for 3 seconds, you will
trigger the pager function. The remote will beep to inform you of its location. User can press the
LOCK or UNLOCK button to stop the beeping of the remote once it is found.
Multi-car Operation
This option allows the owner of two vehicles, both equipped with the same remote starter model, to
control both systems independently with a single remote control. To control the second vehicle:
Press + simultaneously:............................................ LOCK
Press + simultaneously:............................................ UNLOCK
Press + simultaneously:............................................................START
Press + simultaneously:............................................... STOP
Press ¾ ¾ : ...........................................................TRUNK
or
Press ¾ ¾ :.........................................................LOCK
Press ¾ ¾ :......................................................... UNLOCK
Press ¾ ¾ :........................................................... START
Press ¾ ¾ :........................................................... STOP
Press ¾ ¾ :........................................................... TRUNK