Filter
Top Products
User Guide P. 13
To exit Cold Weather Mode, do any one of the following actions:
• Open the hood.
• Start the engine by remote.
• Turn the key to the IGNITION ON (RUN) position.
• Press and release the button and you will hear a beep; L-01 will appear on the display.
Press the button for 3 seconds (the parking lights will flash once).
When the system exits Cold Weather Mode, the remote control will beep once and the
icon will disappear.
To verify whether the system is in Cold Weather Mode:
• Press the brake pedal: If the vehicle is in Cold Weather Mode, the parking lights will stay on
while the pedal is pressed.
How to access Cold Weather Mode
Function Button pressed Icon Sound Instructions /description
To enter Cold
Weather Mode
+
Beep
To exit Cold
Weather Mode
+
None Beep
Press
and hold for 3
seconds.
Extended Run Time
While the vehicle is running under a remote start, pressing and holding the button for more
than 3 seconds will reset the run time counter to zero and restart the run time cycle from the
beginning. There will be three beeps and the parking lights will flash three times. The extended
run time procedure can only be carried out once per remote start.
To stop the vehicle, at any moment, simply press the
button.
Example: If your remote car starter is programmed for a run time of 3 minutes and your vehicle
has been running for 2 minutes already, pressing the
button will reset the counter to zero and
allow the engine to run for another cycle (in this case, 3 minutes).
Advanced Features: Installation-programmable Options
The remote starter was designed with flexibility and OEM integration in mind. With its program-
mable options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution: The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your remote starter.
Remote Door Locks
If your remote starter was installed with the remote door locks option, you will have the
convenience of remote keyless entry. See section “Arming the Starter Kill”, on page 9, for further
instructions on remote door locking and unlocking.
Priority Door Access
If the priority door locks option is installed on your vehicle, this safety feature allows you to unlock
solely the driver’s door with a single press of the
button on the transmitter. Upon a second
press of the
button, all the other doors will unlock.
Note: Most vehicles require the use of an additional relay for this option; please consult with your
installer.