Filter
Top Products
User Guide P. 19
¾ ¾ ¾ : customized feature 3
¾ ¾ ¾ : customized feature 4
Accessing the Multi-Level Features and Other Transmitter Functions
• To access a Level 1 feature, press and release the button and you will hear a “beep”;
L-01 will be displayed. This display means that you are now in Level 1. Simply press the
corresponding button to access the desired feature.
• To access a Level 2 feature, press and release the
button and you will hear a “beep’’; L-02
will be displayed. This display means that you are now in Level 2. Simply press the
corresponding button to access the desired feature.
• To access a Level 3 feature, press and release the
button and you will hear a “beep”; L-03
will be displayed. This display means that you are now in Level 3. Simply press the
corresponding button to access the desired feature.
Your installer can customize the system as to personalize these multi-level features in an order that
best suits your needs. Your options are:
Option 1:
Level 1
(requires pressing the button 1X) Æ Multi-car operation
Level 2 (requires pressing the button 2X) Æ Basic features
Level 3 (requires pressing the button 3X) Æ Customized features
Option 2 (on by default):
Level 1 (requires pressing the button 1X) Æ Basic features
Level 2 (requires pressing the button 2X) Æ Multi-car operation
Level 3 (requires pressing the button 3X) Æ Customized features
Option 3:
Level 1 (requires pressing the button 1X) Æ Customized features
Level 2
(requires pressing the button 2X) Æ Multi-car operation
Level 3 (requires pressing the button 3X) Æ Basic features
Option 4:
Level 1 (requires pressing the button 1X) Æ Basic features
Level 2
(requires pressing the button 2X) Æ Customized features
Level 3 (requires pressing the button 3X) Æ Multi-car operation
Example: If the multi-level features were set to option 3, the setup would be as follows:
For “Basic features”:
x To access the AUX 2 feature, the user needs to press on the button three (3) times followed
by the button.
x To access Cold Weather Mode, the user needs to press on the button three (3) times
followed by the button.