Filter
Top Products
User Guide P. 15
How to Access Safe Start Mode
Function By pressing Icon Sound Instructions / description
Start on Safe
Start Mode
x 2
Melody
Press
twice within 3
seconds. Press for 1 sec-
melody-then press 1 sec.
Stop on Safe
Start Mode
None Melody
Installer-programmable Valet Modes
Valet Mode Using the Valet Switch (
if installed
)
When your vehicle is in Valet Mode, the remote starter functions are disabled. If the vehicle needs
to be serviced, or if you park it indoors, the Valet Mode will prevent the engine from being remote
started accidentally.
To put the system into valet mode:
• Turn the key to the IGNITION ON (RUN) position.
• Within 3 sec., press the valet button for 1 second.
The parking lights will flash three times to indicate that the vehicle is now in valet mode.
• Turn the key to the OFF position.
The LED on the antenna will come ON solid.
To take the system out of valet mode:
• Turn the key to the IGNITION ON (RUN) position.
• Within 3 sec., press the valet button for 1 second.
The parking lights will flash twice to indicate that the vehicle is now out of valet mode.
The LED will go out or start to flash.
Note: Once valet mode is activated, the remote starter and alarm functions will be disabled.
Home Valet Mode
If configured at installation, this feature will set the vehicle to a no-remote-start mode: if the vehicle
is parked indoors there is no danger of it starting accidentally by remote control.
Note: Once the Home Valet Mode is activated, the vehicle will not start by remote but the
alarm functions will still be active.
To take the system into Home Valet Mode:
• Press the or button.
• Within 3 seconds, press the and buttons simultaneously until the parking lights turn ON,
then release both buttons.
• The icon will appear on your LCD remote.
To take the system out of Home Valet Mode:
• Turn the ignition key to the IGNITION ON (RUN) position.
The system will warn you if someone attempts to start your vehicle while it stands in Home Valet
Mode. The parking lights will:
1- Turn ON then OFF; then
2- Flash twice, pause; then
3- Flash twice again.