Filter
Top Products
55-EN
Setting item: AUX IN
Setting contents: OFF / ON / DVD / Game / EXT. DVD. /
DVD CHG
• OFF is not displayed when the optional DVD player or DVD changer
is connected. During System setup, although the AUX name can be
changed, it is not displayed on the source selection screen.
• When OFF is selected, the settings related to AUX cannot be changed
from this unit.
• The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
After setting to ON in “Setting the AUX Mode”, this setting can be
carried out.
Setting item: AUX IN Level
Setting contents: Low / High
After setting to ON in “Setting the AUX Mode”, this setting can be
carried out.
Setting item: AUX IN Signal
Setting contents: NTSC / PAL
• The video input type can be changed.
Outputs the picture of the source selected on the INA-W900 connected
to the rear monitor.
Setting item: AUX OUT
Setting contents: OFF/ON
Setting item: BLUETOOTH IN
Setting contents: OFF / Adapter
An external device (such as a portable music player) can be connected
to the Bluetooth interface connector of this unit. A special Conversion
cable (KCE-237B) is necessary to adapt the Bluetooth interface
connector as an AUX IN.
Setting item: AUX+ IN
Setting contents: OFF / ON
• When OFF is selected, the settings related to AUX+ cannot be
changed from this unit.
After setting to ON in “Setting the AUX+ Mode”, this setting can be
carried out.
Setting item: AUX+ Level
Setting contents: Low / High
The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.
Setting item: Rear Source
Setting contents: OFF / Disc / iPod / DVD CHG. / EXT.DVD / AUX
• Select OFF to cancel the rear entertainment mode.
• The display of setting contents may vary depending on the setting
and connected device.
Setting the AUX Mode
OFF: AUX source is not displayed.
ON: AUX source is displayed.
Adjusting the External Input Audio Level
Low: Decreases the external input audio level.
High: Increases the external input audio level.
Switching the Visual Input Signal System
Setting the Picture Output
OFF: The “Remote Sensor” and “Rear Source” items are not
displayed on the System Setup screen.
ON: The “Remote Sensor” and “Rear Source” items are
displayed on the System Setup screen.
Setting the BLUETOOTH Connection
(BLUETOOTH IN)
OFF: Select to ignore any external interrupts.
Adapter
: Select when the optional BLUETOOTH box is
connected.
The TEL screen of the BLUETOOTH is displayed.
When an external interruption occurs, the display
changes to the TEL screen.
Setting the AUX+ Mode
OFF: AUX+ source is not displayed
ON: AUX+ source is displayed
Adjusting the AUX+ Audio Level
Low: Decreases the external input audio level.
High: Increases the external input audio level.
Setting the Rear Entertainment System