PC Configuration
46 1/1551-CRH 102 167 Uen Rev A 2006-09-07
3.3.1 Accessing a Shared Device
To access a shared device from a PC using Windows 2000 or XP, follow
the steps below:
1. In the Windows task bar, click the Start button, and then click Run….
2. Type \\<host name>\<share Name> in the Open field. The Host
name and Share name are displayed on the Ericsson W20 File
Sharing page. Click OK .
3. The shared resource is displayed. Double-click on the shared file to
open it.
3.3.2 Checking Workgroup Settings
The following sections include instructions on how to check the workgroup
settings on a PC using Windows XP or 2000.
Windows XP
Follow the steps below to check the workgroup settings on a PC using
Windows XP:
1. In the Windows task bar, click the Start button, and then click Control
Panel. The Control Panel window is displayed.
2. If you are using Category View, click Performance and Maintenance
and then See basic information about your computer. If you are
using Classic View, double-click System. The System Properties
window is displayed.
3. Click the Computer Name tab.
4. Click Change…. The Computer Name Changes window is displayed.
5. Make sure that the Workgroup name is exactly the same as on the
Ericsson W20 File Sharing page. If not, you have to change the
workgroup either on the PC or on the Ericsson W20.
6. If you decide to change the workgroup on the PC, type the correct
name in the Workgroup field and click OK . If you do not want to
make any changes, click Cancel. The Computer Name Changes
window is closed.
7. If you have changed the workgroup settings, follow the instructions on
the screen to restart the PC.
