Configuration and Management
40 1/1551-CRH 102 167 Uen Rev A 2006-09-07
Figure 33 Software Update initiated page
The information on this page is updated every tenth second. When the
upgrade is finished, the following page is displayed:
Figure 34 Software Update complete page
Click Restart to restart the Ericsson W20.
To install new software from a local file, make sure that the new software
file is available on your PC. Then click Browse… in the Software Update
section. Follow the instructions on the screen to locate the configuration
file. The selected file will be displayed in the Update the system with new
software field.
Click Upgrade to upgrade the Ericsson W20 with the new software
version. The Software Update initiated and Software Update complete
pages are displayed. See the information and Figures 33 and 34 above.
