Configuration and Management
1/1551-CRH 102 167 Uen Rev A 2006-09-07
41
2.10 Event Log
On the Event Log page, a list of the Ericsson W20 logs is displayed:
Figure 35 Event Log page
Each row in the log list displays the time and date when an alarm occurred,
the type of alarm, and a brief statement indicating its cause.
If persistent logging is enabled, the logs will remain after a system restart.
To enable this feature, select the Persistent logging check box on the
Event Log page and click Apply.
To view only a selection of the logs in the list, select a filter level from the
Display list. Available log levels are Alarm and All. The Alarm log level
corresponds with the Alarm indicator on the Ericsson W20 unit and the
information in the Alarms section on the Overview page.
Click Refresh to update the list with new information. The most recent logs
are listed at the bottom of the list.
