A SERVICE OF

logo

Open as PDF
next previous
Configuration and Management
34 1/1551-CRH 102 167 Uen Rev A 2006-09-07
Adding an Instance
To add a new port forwarding instance, click Add instance
in the Port
Forwarding section on the NAT page. The Add Portforwarding Instance
page is displayed:
Figure 29 Add Portforwarding Instance page
Fill in the Protocol, NAT Port, Server IP, and Server Port fields and click
Apply .
Example
In the following example, port forwarding is used to allow incoming access
to an internal web server.
Protocol: TCP
NAT Port: 80
Server IP: 192.168.1.101
Server Port: 8080
When one or more port forwarding instances are added, the following
details are displayed for each instance in the Port Forwarding table on the
NAT page:
NAT Port
The NAT port number that the data traffic is allowed
to be transported on.
Server IP
The IP address of the destination unit.