M:\Product Information\366-348\Instructions\366-348 MGB Fuel Injection Installation Instructions_Grant_2.doc
Part 28 - Contents of the Kit
Note- specifications and components are subject to change and revision without notice.
No. Qty UOM Description
Throttle Body Components
770-845 1 EACH THROTTLE BODY ASSEMBLY
052-815 2 EACH POLYMER BEARING, THROTTLESHAFT- send to TWM to install in TB
772-218 1 EACH GASKET, UPPER TO LOWER, MGB FI
052-252 4 EACH BOLT, HEX, 5/16-18 X 1.0
Install 1 under throttle stop
Bag the other 3 with clamps
052-803 1 EACH BELLCRANK ARM, THROTTLE CABLE
Drill hole, cut slot, cut brkt
771-969 1 EACH TPS SENSOR, MGB FI
771-970 1 EACH IDLE AIR CONTROL MOTOR, MGB FI
771-971 1 EACH INJECTOR, FUEL INJECTION, MGB
052-811 1 EACH INJECTOR CLAMP
771-972 1 EACH MAP SENSOR, MGB FI
771-973 1 EACH COOLANT TEMP SENSOR, MGB FI
771-774 1 EACH RETURN SPRING, GM, MGB FI
771-775 1 EACH RETURN SPRING, BKT, MGB FI
772-029 1 EACH SPRING, THROTTLE STOP, MGB FI
772-229 1 EACH THROTTLE CABLE BRACKET, MGB FI
772-052 4 EACH BOLT, FLATHEAD SOCKT M6X1.0X16
Upper to Lower TB bolts
052-801 2 EACH CAP SCREW,BUTTON HD,M4X.7X16MM
052-802 2 EACH CAP SCREW,BUTTON HD,M4X.7X12MM
052-803 1 EACH BELLCRANK ARM, THROTTLE CABLE
772-269 1 EACH LOCK WASHER, 1/4", ZINC
052-805 1 EACH WASHER, M6X1.6X18OD, ZINC
052-806 1 EACH NUT, HEX, M6 X 1.0 X 6, ZINC
052-807 1 EACH BOLT, HEX,M5 X 0.8 X 30.0,ZINC
052-808 2 EACH SCREW, BUTTON HEAD,M5X0.8X10
052-809 8 EACH SCREW, BUTTON HEAD,M3X0.5X8
Fuel Pressure Regulator Cap
051-142 2 EACH HOSE BARB, 5/32 VACUUM
051-680 2 EACH HOSE BARB, 3/8 VACUUM
771-493 1 EACH DISC, SPRING TPS
771-496 1 EACH RETAINER, SHAFT
Holds spring on TPS side
052-813 4 EACH BOLT, HEX, M6 X 20, ZINC,10.9
366-235 2 EACH GASKET
Above & below heatshield mnt
772-246 1 EACH O-RING, SAE J200, WALKER G1371
Lower seal for fuel inector
771-494 1 EACH GUARD, SPRING, 650
772-272 4 EACH SCREW,ALLEN,BTNHD,6-32X1/4INSS
supposed to come w/regulator
772-273 1 EACH AHCS, 10-32 X 0.75, ZINC
Put inspectors lacquer on bolt once fuel pressure is set
772-274 1 EACH NUT, HEX, 10-32, ZINC
for AFPR
Page 49 of 52
