A SERVICE OF

logo

Figure 48. Cabling diagram—2.5 inch (x10) SAS/SATA backplane
1. SW_RAID_A connector on the system
board
2. SW_RAID_B connector on the system
board
3. SATA_HDD8 connector on the system
board
4. SATA_HDD9 connector on the system
board
5. cable routing latch 6. SAS_A connector on the backplane
7. SAS_B connector on the backplane 8. SAS_C connector on the backplane
9. hard drive/SSD backplane 10. system board
Related Links
Removing a hot-swap hard drive
112