Filter
Top Products
5-43
CRANKSHAFT POSITION SENSOR AND PICKUP ROTOR
ENG
NOTE:
NOTE:
NOTE:
REMOVING THE PICKUP ROTOR
1. Remove:
Sclutch cable holder
1
Spickup rotor cover
2
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern. After all of
the bolts are fully loosened, remove them.
2. Remove:
Spickup rotor bolt
1
Swasher
2
Spickup rotor
3
While holding the generator rotor
4
with the ro-
tor holding tool
5
, loosen the pickup rotor bolt.
Sheave holder
90890-01701, YS-01880-A
INSTALLING THE PICKUP ROTOR
1. Install:
Spickup rotor
1
Swasher
Spickup rotor bolt
When installing the pickup rotor, align the
groove
2
in the crankshaft sprocket with the
point
a
in the pickup rotor.