Filter
Top Products
5-77
CONNECTING RODS AND PISTONS
ENG
WARNING
CAUTION:
NOTE:
e. Tighten the nut further to reach the specified
angle (150_).
When the nut is tightened more than the spe-
cified angle, do not loosen the nut and then
retighten it.
Replace the bolt with a new one and perform
the procedure again.
SDo not use a torque wrench to tighten the
nut to the specified angle.
STighten the nut until it is at the specified
angles.
When using a hexagonal nut, note that the
angle from one corner to another is 60_.