Filter
Top Products
4-61
HANDLEBARS
CHAS
11 Nm (1.1 mSkg, 8.0 ftSlb)
NOTE:
33 Nm (3.3 mSkg, 24 ftSlb)
13 Nm (1.3 mSkg, 9.4 ftSlb)
NOTE:
WARNING
23 Nm (2.3 mSkg, 17 ftSlb)
5. Install:
Sclutch lever holder
1
Align the slit on the clutch lever holder with the
punch mark
a
on the left handlebar.
6. Install:
Sleft handlebar
Sleft handlebar pinch bolt
1
Sleft handlebar bolt
2
7. Install:
Sleft handlebar switch
1
Align the projection
a
on the left handlebar
switch with the hole
b
on the left handlebar.
8. Install:
Shandlebar grip
a. Apply a thin coat of rubber adhesive onto the
end of the left handlebar.
b. Slide the handlebar grip over the end of the
left handlebar.
c. Wipe off any excess rubber adhesive with a
clean rag.
Do not touch the handlebar grip until the
rubber adhesive has fully dried.
9. Install:
Sgrip ends