Filter
Top Products
PERIODIC MAINTENANCE AND MINOR REPAIR
6-41
6
EAU04875
Replacing a license plate light
bulb
1. Remove the license plate light unit
by removing the nuts, washers
and rubber dampers.
2. Remove the license plate light
lens by removing the nuts and
washers.
3. Remove the defective bulb by pull-
ing it out.
4. Insert a new bulb into the socket.
5. Install the license plate light lens
by installing the washers and the
nuts.
6. Install the license plate light unit by
installing the rubber dampers,
washers and the nuts.
ECA00107
CAUTION:
_
Do not overtighten the nuts, other-
wise the lens may break.
_
1. Nut (× 2)
2. Washer (× 2)
3. Rubber damper (× 2)
4. Licence plate light unit
1. Nut (× 2)
2. Washer (× 2)
3. Bulb (× 2)
4. Licence plate light lens