Filter
Top Products
INSTRUMENT AND CONTROL FUNCTIONS
3-12
3
EW000030
WARNING
_
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of
control and possibly an accident.
_
To release the helmet from the
helmet holder
Remove the seat, remove the helmet
from the helmet holder, and then install
the seat.
EAU00285
Adjusting the front fork
This front fork is equipped with spring
preload adjusting bolts.
EW000035
WARNING
_
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
_
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection
a
. To decrease the spring pre-
load and thereby soften the
suspension, turn the adjusting bolt on
each fork leg in direction
b
.
NOTE:
_
Align the appropriate groove on the ad-
justing mechanism with the top of the
front fork cap bolt.
_
CI-10E
1. Spring preload adjusting bolt 1. Current setting
2. Front fork cap bolt
Setting
Minimum (soft) 8
Standard 5
Maximum (hard) 1